Please note that the iron-on badges provided are designed to be easily applied at home using a normal iron and cloth. However, we cannot be held responsible for any errors that may occur during the application or any damage caused by washing the shirt on a heated wash.
To apply the badge, please follow the below steps:
– Turn on your iron or heat press and set it to a medium setting of around 150 Celsius. Make sure that the steam setting is turned off.
– Place a thin piece of material (e.g. pillowcase) over the badge and press down firmly with your iron or heat press for 20 seconds. Be careful not to burn the material or the badge.
– Check that all the edges of the badge are properly fixed and allow the badge to cool.
– Slowly peel back the edges of the badge. If the badge has not been applied fully, reapply the heat for 5-10 seconds.
– Do not wash the badge for at least 48 hours and when you do wash it, use a low-temperature setting only.
| Weight | 0,05 kg |
|---|---|
| Dimensions | 16 × 22 × 0,5 cm |
| Badge | The FA – Match Official, The FA – Referee, Bedfordshire FA, Berks & Bucks FA, Birmingham FA, Cambridgeshire FA, Cheshire FA, Cornwall FA, Cumberland FA, Durham FA, East Riding FA, Essex FA, Hampshire FA, Herefordshire FA, Hertfordshire FA, Hunts FA, Kent FA, Lancashire FA, LCFA, Leicester & Rutland FA, Lincolnshire FA, London FA, Manchester FA, Middlesex FA, Norfolk FA, Northamptonshire FA, Northumberland FA, North Riding FA, Nottinghamshire FA, Sheffield & Hallamshire FA, Shropshire FA, Somerset FA, Staffordshire FA, Suffolk FA, Surrey FA, Sussex FA, West Riding FA, Westmorland FA, Wiltshire FA, Worcestershire FA, Oxfordshire FA |
Related products
ALL
